DCS Control System
System Description
DMF recovery process is a typical chemical distillation process, characterized by a large degree of correlation between process parameters and a high requirement for recovery indicators. From the current situation, the conventional instrument system is difficult to achieve real-time and effective monitoring of the process, so the control is often unstable and the composition exceeds the standard, which affects the production efficiency of enterprises. For this reason, our company and Beijing University of Chemical Technology jointly developed THE DCS control system of DMF recycling engineering computer.
Computer decentralized control system is the most advanced control mode recognized by the international control circle. In recent years, we have developed a two-tower double-effect computer control system for DMF recovery process, DMF-DCS (2), and a three-tower three-effect computer control system, which can adapt to the industrial production environment and has very high reliability. Its input greatly stabilizes the production of recycling process and plays an important role in improving the output and quality of products and reducing energy consumption.
At present, the system has been successfully implemented in more than 20 large synthetic leather enterprises, and the earliest system has been in stable operation for more than 17 years.
System structure
Distributed computer control system (DCS) is a widely accepted advanced control method. It usually consists of control station, control network, operation station and monitoring network. Broadly speaking, DCS can be divided into three types: instrument type, PLC type and PC type. Among them, PLC has a very high industrial reliability and more and more applications, especially since the 1990s, many famous PLC increased analog processing and PID control functions, thus making it more competitive.
The COMPUTER control system of DMF recycling process is based on PC-DCS, using German SIEMENS system as the control station, and ADVANTECH industrial computer as the operating station, equipped with large screen LED, printer and engineering keyboard. A high-speed control communication network is adopted between the operation station and the control station.
Control function
The control station is composed of parameter data collector ANLGC, switch parameter data collector SEQUC, intelligent loop controller LOOPC and other decentralized control methods. All kinds of controllers are equipped with microprocessors, so they can work normally in backup mode in case of CPU failure of the control station, fully guaranteeing the reliability of the system.
Related products
-
DMF Solvent Recovery Plant
Process brief introduction After the DMF solvent from the production process is preheated, it enters the dehydrating column. The dehydrating column is provided with heat source by the steam on the top of the rectification column. The DMF in the column tank is concentrated and pumped into the evaporation tank by the discharge pump. After the waste solvent in the evaporation tank is heated by the feed heater, the vapor phase enters the rectification column for rectif...
-
Residue Dryer
Equipment Description The residue dryer pioneered the development and promotion can make the waste residue produced by DMF recovery device completely dry, and form slag formation. To improve the DMF recovery rate, reduce the pollution of the environment, reducing the labor intensity of workers, too. The dryer has been in a number of enterprises to obtain good results. Equipment Picture
-
Toluene Recovery Plant
Equipment Description The toluene recovery plant in the light of the super fiber plant extract section, innovate the single effect evaporation for double-effect evaporation process, to reduce energy consumption by 40%, combined with falling film evaporation and the residue processing continuous operation, reducing the polyethylene in the residual toluene, improve the recovery rate of toluene. Toluene waste treatment capacity is 12~ 25t / h Toluene recovery rate ≥99% ...
-
Dry Solvent Recovery Plant
Main Features Dry process production line emissions except DMF also contains aromatic, ketones, lipids solvent, pure water absorption on such solvent efficiency is poor, or even no effect. The Company developed the new dry solvent recovery process, revolutionized by the introduction of ionic liquid as the absorbent, can be recycled in the tail gas of solvent composition, and has the great economic benefit and environmental protection benefit.
-
DMF Waste Gas Recovery Plant
Equipment Description In the light of the dry & wet production lines of the synthetic leather enterprises emitted DMF exhaust gas, the DMF waste gas recovery plant can make the exhaust reaches the requirements of environmental protection, and recycling the DMF components, using high performance fillers make DMF recovery efficiency higher. The DMF recovery can reach above 95%. The device adopts the cleaning technology of spray adsorbent. DMF is easy to dissolve in...
-
DMAC Solvent Recovery Plant
Equipment Description This DMAC recovery system uses five-stage vacuum dehydration and one-stage high vacuum rectification to separate DMAC from water, and combines with vacuum deacidification column to obtain DMAC products with excellent indexes. Combined with evaporation filtration and residual liquid evaporation system, the impurities mixed in DMAC waste liquid can form solid residue, improve the recovery rate and reduce pollution. This device adopts the main proc...