DMAC Solvent Recovery Plant
Equipment Description
This DMAC recovery system uses five-stage vacuum dehydration and one-stage high vacuum rectification to separate DMAC from water, and combines with vacuum deacidification column to obtain DMAC products with excellent indexes. Combined with evaporation filtration and residual liquid evaporation system, the impurities mixed in DMAC waste liquid can form solid residue, improve the recovery rate and reduce pollution.
This device adopts the main process of five-stage + two-column high vacuum distillation, which is roughly divided into six parts, such as concentration, evaporation, slag removal, rectification, acid removal and waste gas absorption.
In this design, the process design, equipment selection, installation and construction are targeted to optimize and improve, in order to achieve the goal of making the device run more stable, the finished product quality is better, the operating cost is lower, the production environment is more environmentally friendly.
Technical Index
DMAC wastewater treatment capacity is 5~ 30t / h
Recovery rate ≥ 99 %
DMAC content ~2% to 20%
FA≤100 ppm
PVP content ≤1‰
Quality of DMAC
|
项目 Item |
纯度 Purity |
水分 Water content |
乙酸 Acetic acid |
二甲胺 DMA |
|
单位 Unit |
% |
ppm |
ppm |
ppm |
|
指标 Index |
≥99% |
≤200 |
≤30 | ≤30 |
Quality of column top water
| 项目 Item |
COD |
二甲胺 DMA |
DMAC |
温度 temperature |
| 单位 Unit |
mg／L |
mg／L |
ppm |
℃ |
| 指标Index |
≤800 |
≤150 |
≤150 |
≤50 |
Equipment Picture
Related products
-
Residue Dryer
Equipment Description The residue dryer pioneered the development and promotion can make the waste residue produced by DMF recovery device completely dry, and form slag formation. To improve the DMF recovery rate, reduce the pollution of the environment, reducing the labor intensity of workers, too. The dryer has been in a number of enterprises to obtain good results. Equipment Picture
-
DMF Effluent Recovery Plant
General Description This proposal is designed for the recovery of DMF effluent generated during process of RO membrane production. Due to the low effluent concentration (~5%), considering the operating cost of the DMF effluent recovery equipment, the process flow is designed based on a three-efficiency energy-saving process, including two-stage concentration and dehydration, one-stage distillation and one-stage deacidification and refining. At the same time, the en...
-
Chemical Storage Tanks
Chemical storage tanks are key static equipment used in the chemical, petroleum, energy, food and other industries for storing liquids or gases. Their design, selection and management directly affect production safety, environmental protection and economic benefits. The following is a comprehensive analysis of chemical storage tanks, covering types, design, materials, accessories and safety points. I. Main Classification (by Use and Structure) There are many types o...
-
DMAC Solvent Recovery Plant
DMAC Recovery Plant 说明 Brief Introduction 本套DMAC回收系统采用负压MVR浓缩+二效真空精馏工艺将DMAC与水分离，结合真空脱酸塔（精制塔）可得到指标优异DMAC产品。结合蒸发过滤、残液蒸干系统，可使废液中的PVP形成固体残渣排出系统，提高回收率的同时减少污染。 This DMAC recovery plant uses negative pressure MVR concentration + two-effect vacuum distillation process to separate DMAC from water, and combines with vacuum deacidification tower (refining tower) to obtain DMAC product...
-
Dry Solvent Recovery Plant
Main Features Dry process production line emissions except DMF also contains aromatic, ketones, lipids solvent, pure water absorption on such solvent efficiency is poor, or even no effect. The Company developed the new dry solvent recovery process, revolutionized by the introduction of ionic liquid as the absorbent, can be recycled in the tail gas of solvent composition, and has the great economic benefit and environmental protection benefit.
-
DCS Control System
System Description DMF recovery process is a typical chemical distillation process, characterized by a large degree of correlation between process parameters and a high requirement for recovery indicators. From the current situation, the conventional instrument system is difficult to achieve real-time and effective monitoring of the process, so the control is often unstable and the composition exceeds the standard, which affects the production efficiency of enterpri...